Filters
Description
Rusredmet manufactures three types of filtration equipment: Nutch filters, Druck filters, and filter presses. The primary construction materials in contact with process media are polypropylene, stainless steel, and carbon steel (Steel 3), allowing these units to operate in a wide range of aggressive chemical environments.
Nutch Filters
Description
Our nutch filters are designed for simplicity, ease of operation, and safe use in aggressive media at temperatures up to +100°C. They are available in various modifications, from laboratory models with a filtration area of S = 0.006 m² to industrial models with S < 2 m².
The primary construction material is polypropylene, and each filter comes with a filter cloth. Metal nutch filters can also be manufactured upon request.
The nutch filter connects to a vacuum pump via a receiver to prevent filtrate from entering the vacuum pump.
Model: NFP-0.15-500 PP/SS
NF – Nutch Filter, a batch filtration filter for suspensions under vacuum
P – Industrial model with manual sludge discharge (L – Laboratory model)
0.15 – Filtration area in m²
500 – Outer diameter of suspension and filtrate receivers, mm
PP – Primary construction material: polypropylene
SS – Primary construction material: stainless steel
Technical Specifications
Druck Filter
Description
The druckfilter is a nutsche filter operating under positive pressure. The company manufactures druck filters with a suspension receiver volume of up to 5 liters and a filtration area of up to 0.035 m². The druck filter is equipped with a pressure sensor.
Model: DFL-0.06-90 PP
DF – Druck Filter, a batch-type pressure filtration vessel for suspensions.
L – Laboratory scale.
0.06 – Filtration area, m².
90 – Outer diameter of suspension and filtrate receivers, mm.
PP – Main construction material: polypropylene.
Technical Specifications
Filter Presses
Description
Our filter presses are manufactured using modern construction materials. These filter presses are designed for filtration of a wide range of suspensions in research laboratories and across various industries, including chemical, mining and mineral processing, metallurgical, and food industries. In addition, these units are used in water treatment and wastewater purification systems.
The structural features of our filter presses allow for washing and drying of the filter cake. The presses are equipped with polypropylene filter plates, resistant to corrosive environments at temperatures up to 90°C.
Model: CFP1.0/50-1PP-03SS
CFP – Chamber-type filter press.
1.0 – Filtration area, m².
50 – Plate thickness, mm.
1 – Drive type: electric-hydraulic (2 – manual hydraulic drive).
PP – Material of filter plates: polypropylene.
03 – Material of metallic parts in contact with the process medium: stainless steel grade 12X18H10T.
Drive type designation:
1 – Electric-hydraulic drive
2 – Manual drive
Designation of metallic parts material in contact with the medium:
01 – Polypropylene
02 – Steel 3
03 – Stainless steel 12X18H10T
04 – Titanium VT1-0
05 – Steel 10X17MN13M3T
The filter press is supplied with a membrane pump, piping, a pressure-regulating filter, and a diaphragm manometer, with optional filter cake washing and drying systems tailored to client requirements.
Operating temperature: 0 to 100°C
Technical Specifications
Product Gallery
© 2012 - 2026 RUSREDMET
